 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SAW Bandpass Filter F1G59 Features RF bandpass filter High attenuation Usable bandwidth 40.0MHz No matching 50 single-ended operation Ceramic Surface Mounted Device (SMD) Package Package Dimensions 1 6 6 1 2 I 1G59 5 5 2 3 4 4 3 Pin Configuration mensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit C C dBm Minimum -55 -55 Typical 25 Maximum 85 95 10 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G59 NC9008 AS01 1/7 SAW Bandpass Filter F1G59 Specifications Fc = 1590.0 MHz Terminating source impedance Terminating load impedance : 50 : 50 Minimum Center Frequency ( Fc ) Insertion Loss (Fc 20.0 MHz) Amplitude Ripple VSWR (Fc 20.0 MHz) MHz dB dB - Typical 1590.0 3.7 1.0 1.8 Maximum 4.5 1.8 2.5 (Fc 20.0 MHz) Relative Attenuation DC~ 1200.0 MHz 1200.0MHz ~ 1530.0MHz 1700.0MHz ~ 2000.0MHz 2000.0MHz ~ 3000.0MHz dB 45 40 40 40 50 45 45 45 - Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G59 NC9008 AS01 2/7 SAW Bandpass Filter F1G59 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50 Output 50 Marking Configuration 1) I2) 1G593) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G59 NC9008 AS01 3/7 SAW Bandpass Filter F1G59 Typical Performance ( at 25 ) CH1 S21 LOG 10 dB/ REF 0 dB 12 Aug 2009 03:48:28 3: -3 . 2358 dB 1 610 . 000 000 MHz CH1 Markers Cor 3 2 2: -3 . 4768 dB 1. 57000 GHz CENTER 1 590 . 000 000 MHz SPAN 500 . 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB 12 Aug 2009 04:01:27 3: -3 . 3577 dB 1 610 . 000 000 MHz 3 CH1 Markers Cor 2 2: -3 . 6420 dB 1. 57000 GHz START . 010 000 MHz STOP 3 000 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G59 NC9008 AS01 4/7 SAW Bandpass Filter F1G59 Input / Output VSWR Charts CH1 S11 SWR 1/ REF 1 12 Aug 2009 03:48:39 3: 1. 8624 1 610 . 000 000 MHz CH1 S22 SWR 1/ REF 1 12 Aug 2009 03:48:55 3: 1. 8544 1 610 . 000 000 MHz CH1 Markers Cor 2: 1. 2262 1. 57000 GHz CH1 Markers Cor 2: 1. 2521 1. 57000 GHz 3 3 CENTER 1 590 . 000 000 MHz 2 SPAN 500 . 000 000 MHz CENTER 1 590 . 000 000 MHz 2 SPAN 500 . 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 3: 84. 984 21. 777 12 Aug 2009 03:48:47 2. 1528 nH 1 610 . 000 000 MHz CH1 S22 1 U FS 3: 81. 020 25 . 148 12 Aug 2009 03:49:01 2. 4860 nH 1 610 . 000 000 MHz CH1 Markers Cor 2: 56. 684 -8 . 6035 1. 57000 GHz Cor CH1 Markers 2: 44. 506 -9 . 0977 1. 57000 GHz 3 3 2 2 CENTER 1 590 . 000 000 MHz SPAN 500 . 000 000 MHz CENTER 1 590 . 000 000 MHz SPAN 500 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G59 NC9008 AS01 5/7 SAW Bandpass Filter F1G59 Packing Specification 1. Reeling Quantity : 3000 pcs / 13" reel ( or 1000 pcs / 7" reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G59 NC9008 AS01 6/7 SAW Bandpass Filter F1G59 Carrier Tape Dimensions [unit : mm] A B C D E F 3.40 0.1 3.40 0.1 7.25 0.1 1.70 0.1 12.00 0.1 8.00 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G59 NC9008 AS01 7/7 |
Price & Availability of F1G59
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |